Hiyas, I am trying to make my own cable to work on consumer TVs and I think I am missing something. I dare say my issues are my poor grasp of electrical engineering.

I have a RGC scart to BNC connected to my BVM. If I use my new cable, connected to the RGC cable into the BVM it works. I take this to mean that the R, G, B and csync pins are working correctly.

I have more trouble going into a consumer set. The mister is outputting 3.3v on vga pin 14, which is the scart blanking pin.

​

1. Is scart blanking on pin 16 needed to make rgb work on some consumer sets? I found a spec which says it should be 1 to 3v to show this is csync and not composite video. If I am getting 3.3v on that line instead, maybe the consumer set is not liking it?
2. I have a 470ohm resistor on the csync line. As I understood this should be there for consumer tvs. What I dont understand is that the volts I read on my multi-meter down that wire are the same whether I have the resistor on the end or not. Is a resistor on the line supposed to bring down the volts?
3. Do consumer sets need scart pin 8 connected? Or is this just for autodetection that AV is present. The spec i read says that this pin should be 9.5 to 12v. Is this the same as if I manually changed the channel to "AV"
   

Thank you for the help

Good Morning,

I have been tinkering with my MiSTer this morning. I am trying to get it to output at 1080@60hz. However when I edit my MiSTer.ini and reboot I get no video. When I set it back to 720@60hz video is restored.

I have tried this on two LG OLED televisions. I am certain I had 1080p at one point working. I upgraded SD Cards and am having no luck.

Any help would be appreciated!

PS> Any reason not to set hdmi_audio_96k=1 ?

I see my MISTer is displaying all content as 720p 60Hz. I want to do 1080p 60Hz at integer scaling. Just like you would do on an Analogue product such as the Super NT or the HiDef NES. I have no idea how though. Is there a way to do so with the keyboard on the menus settings to see if mine can even do this?

Vs. Super Mario Bros. Runs fine but CV has that screen scrolling problem where it shows some of the upcoming screens. I’m not sure, I think that’s called a mirroring issue? How to fix?

I put the ROM file for the C64 game I want to run in the regular ROM folder and the core just freaked out. How do I put them in there? Do I need a folder for each game?

Does anyone have a reliable link to download valid/working Neogeo bios files that will work with MiSTer? thanks

Is there a maximum supported micro SD card size on the MISTER?

Hello, just wondering if anyone can point me in the direction of when to expect a new generation of Mister to drop as well as the updated cases that you buy and assemble.

I have the NeoGeo core installed to my Mister System and all Darksoft Games running. Only Metal Slug 3 fails to start? I used the UpdateAll script. The Darksoft romsets.XML file is used .

When i start MSlug 3 the Logos appearing like all other games, but then nothing happens. I tried to switch between Arcade and Console Mode, but no change. Does anybody a know about this problem?

I have a de10 nano and the jamma to mister adapter but I can’t get it to work with my 19" crt wells Gardner GO7 monitor, what board do I need ?

Just got a mister and i alrealy feel cramped with the 8gb sd card that came with it. Any way to clone it and make the img expand on a 256gb card without having to spend the whole week end on this? No i dont want to reinstall the fusion stuff and restart.

Im crossing my fingers you guys an easy way