Subject: Having trouble creating my own IO Port Dsub to scart cable
Hiyas, I am trying to make my own cable to work on consumer TVs and I think I am missing something. I dare say my issues are my poor grasp of electrical engineering.
I have a RGC scart to BNC connected to my BVM. If I use my new cable, connected to the RGC cable into the BVM it works. I take this to mean that the R, G, B and csync pins are working correctly.
I have more trouble going into a consumer set. The mister is outputting 3.3v on vga pin 14, which is the scart blanking pin.
- Is scart blanking on pin 16 needed to make rgb work on some consumer sets? I found a spec which says it should be 1 to 3v to show this is csync and not composite video. If I am getting 3.3v on that line instead, maybe the consumer set is not liking it?
- I have a 470ohm resistor on the csync line. As I understood this should be there for consumer tvs. What I dont understand is that the volts I read on my multi-meter down that wire are the same whether I have the resistor on the end or not. Is a resistor on the line supposed to bring down the volts?
- Do consumer sets need scart pin 8 connected? Or is this just for autodetection that AV is present. The spec i read says that this pin should be 9.5 to 12v. Is this the same as if I manually changed the channel to "AV"
Thank you for the help
Subject: Can't display 1080p?
I have been tinkering with my MiSTer this morning. I am trying to get it to output at 1080@60hz. However when I edit my MiSTer.ini and reboot I get no video. When I set it back to 720@60hz video is restored.
I have tried this on two LG OLED televisions. I am certain I had 1080p at one point working. I upgraded SD Cards and am having no luck.
Any help would be appreciated!
PS> Any reason not to set hdmi_audio_96k=1 ?
Subject: Anyone using a Retro Radionics ArcadeR joystick with the MiSTer?
Subject: How to change the resolution settings?
I see my MISTer is displaying all content as 720p 60Hz. I want to do 1080p 60Hz at integer scaling. Just like you would do on an Analogue product such as the Super NT or the HiDef NES. I have no idea how though. Is there a way to do so with the keyboard on the menus settings to see if mine can even do this?
Subject: MiSTer FPGA MD+ help
Subject: Problems with Vs. Castlevania on MISTer
Subject: Videopac G7000 / Oddysey 2 Core for MiSTer
Subject: Official MiSTer FPGA Discord
Subject: Running C64 games
Subject: First Q*Bert Release by @pcornier
Subject: link for Neogeo bios files that will work with MiSTer
Subject: Maximum SD Card Size?
Subject: faq for updates on the Mister
Subject: Possible mirroring issue with vs. Castlevania
Subject: NEO Geo Metal Slug 3 Problem
I have the NeoGeo core installed to my Mister System and all Darksoft Games running. Only Metal Slug 3 fails to start? I used the UpdateAll script. The Darksoft romsets.XML file is used .
When i start MSlug 3 the Logos appearing like all other games, but then nothing happens. I tried to switch between Arcade and Console Mode, but no change. Does anybody a know about this problem?
Subject: What board should I order?
Subject: Sega Saturn Core Update
Subject: Mr. Do! Core In Development
Subject: An LCD driver board for ALU 1.1 that works = great platform for a Mister FPGA arcade cabinet
Subject: Easy way to upgrade SD Card
Just got a mister and i alrealy feel cramped with the 8gb sd card that came with it. Any way to clone it and make the img expand on a 256gb card without having to spend the whole week end on this? No i dont want to reinstall the fusion stuff and restart.
Im crossing my fingers you guys an easy way